Esduino CAN Shield Board

SKU: ecs-0100
Esduino CAN Shield Board top
Esduino CAN Shield Board bottomPopulated board example

This is the bare board used for the Esduino Master project.  A finished board features CAN connectivity for the FLSC servo network, a HD44780 based LCD display panel, tactile switches for up-down scrolling of LCD display data and two LEDS.

The shield uses only four gpio pins to control two LEDs and the LCD character display by utilizing the SPI peripheral with a 8-bit serial to parallel shift register IC.  Three AD pins are used as key inputs.   schematic link

This BOM lists the additional parts needed to populate the shield.  The Digikey part numbers are suggestions only.  Not all parts need to be added to the board depending on the functionality desired by the user.